Waterite FUSION2 F Series, Руководство пользователя

Страница: 4 / 27

page 3
STEP 1CS
CYCLE SEQUENCE
CYCLE SEQUENCE instructions allows the setting of the order of the
cycle. There are 9 cycles which can be arranged in any order.
Later in this book the INSTALLER SETTINGS allow the setting of how
long cycles will last.
END must be used as the last cycle option. The SERVICE cycle should only be used in brine prefill applications.
If using upflow brine verify that the valve is configured as follows:
1.
upflow piston is installed; and
2. injector is located in up hole and injector plug is in down hole.
The following is an example of how to set a valve so that when regeneration is initiated BACKWASH occurs first, dn
BRINE occurs second, RINSE occurs third, and FILL occurs fourth.
Step 1CS – Press NEXT and simultaneously for 3 seconds until SOFTENING or
FILTERING appears on the display and release. If SOFTENING doesn’t appear, use the
or
∆
button to display it. Then press NEXT and again for 3 seconds and release. If
screen in Step 2CS does not appear in 5 seconds the lock on the valve is activated. To
unlock press , NEXT,
∆
, and SET CLOCK in sequence, then press NEXT and simulta-
neously for 3 seconds and release.
Then press NEXT and again for 3 seconds and release.
Step 2CS – Press the or
∆
, buttons until BACKWASH appears.
Press NEXT to go to Step 3CS.
Press REGEN if you need to return to the previous step.
Step 3CS - Press the or
∆
buttons until dn BRINE appears.
Press NEXT to go to Step 4CS.
Press REGEN if you need to return to the previous step.
Step 4CS - Press the or
∆
buttons until RINSE appears.
Press NEXT to go to Step 5CS.
Press REGEN if you need to return to the previous step.
Step 5CS - Press the or
∆
buttons until FILL appears.
Press NEXT to go to Step 6CS.
Press REGEN if you need to return to the previous step.
Step 6CS - Press the or
∆
buttons until END appears.
Press NEXT to exit CYCLE SEQUENCE.
Press REGEN if you need to return to the previous step.
STEP 2CS
ß
STEP 3CS
ß
STEP 4CS
ß
STEP 5CS
ß
ß
STEP 6CS
ß
RETURN TO NORMAL MODE
ß
CYCLE OPTIONS
BACKWASH DN BRINE FILL
END
RINSE UP BRINE
SOFTENING
OR FILTERING