Waterite FUSION2 F Series, Руководство пользователя

Страница: 13 / 27

page 12
STEP 1US
STEP 2US
STEP 3US
ß
ß
RETURN TO NORMAL MODE
Salt Remaining or Adding Salt
If the Low Salt Warning option was factory installed
the following screens will be viewed in the User Display.
Note: The salt used per regeneration setting was set in
increments of 0.1 pounds, but the LBS REMAINING screen
will round up or down to the closest whole number.
Once the salt remaining has gone below the set point, the display will automatically flash “Salt Fill”.
ß
ß
or
Step 1US – Press the NEXT button until SALT appears in the display.
It does not matter if the SALT display alternates with the LBS REMAINING display.
Step 2US – Press SET CLOCK.
Step 3US – Set LBS REMAINING: Use the or
∆
button to adjust the pounds
remaining in the brine tank.
NOTE: Estimate the pounds of salt in the brine tank and add it to the amount of
salt added to the brine tank. The example at the left would indicate 200 lbs. of
salt being added to a brine tank that has 40 lbs. remaining.
Step 4US – Press SET CLOCK to exit Adding Salt. The control is now in one of its
three normal operating displays. Press NEXT to view GAL CAPACITY REMAINING or
TIME OF DAY.
STEP 4US
ß
LOW SALT WARNING (optional)
When adding salt to the brine tank (if the salt remaining option is used) the following steps must be completed:
RESETTING THE SALT AMOUNT AFTER ADDING