Page
6
of
12
Digital Display
D1
Numeric Display of Voltage (Mostly), Parameter Setting such as Battery Type and Time Switch Parameters
D2
Indication for a Solar Panel. Indicates that a Solar PV Panel is connected to the Controller. No Solar PV Panel Symbol
Indicator, means that the Solar Panel is either Not Connected or the Solar PV Panel is not receiving Sun Light
D3 Charging Indicator
–
This Symbol indicates that the Solar PV Panel is charging the battery. If this indicator is not visible,
this means that the battery voltage is too low for charging. If the Indicator Flickers, then the Battery is charged and in
Floating State.
D4 The bars in the battery indicator, provide a sense on how much charge your battery has. Zero Bars
–
Battery has no
Charge, 5 Bars the battery is fully charged, use this in conjunction with D3 and check whether the battery is in Floating
Charge State.
D5 Battery Discharge Indicator
D6 Load ON / OFF
D7 Amp / Hrs
D8 Volts
Charge Controller Buttons
Configure your Charge Controller for Use
Display and Understanding the use of the Buttons on the faceplate of your Charge controller
There are two buttons on the faceplate of your Charge Controller, namely the Left-Hand Side Button (LHS-B) (sometimes
referred to as the Menu Button and the Right-Hand Side Button (RHS-B)
Left Hand Side Button (LHS-B)
4 functions
–
Menu and Select (enter programming mode) / and Change Setting / Deselect (Exit Programming Mode)
D1
D2
D3
D4
D5
D6
D7
D8
