Waterax STRIKER-II Series, Руководство пользователя

Страница: 22 / 32

Page 20
WATERAX STRIKER-2/3 Owner's Manual
20 04/2015
Pump Tool Kit
1 2 3 4
6
5
7
8
10
9
11
12
ID ITEM NO DESCRIPTION QTY
1 700540 A-1884 PRESSING SLEEVE DISTRIBUTOR 1
2 700531 A-4329 PRESSING SLEEVE ROTARY SEAL 1
3 700532 A-4097 PROTECTOR SHAFT 1
4 700090 A-7644 SEAL PULLER FOR 12-28NS 1
5 700642 A-7711 SEAL REMOVAL PRESS TOOL, 12-28N 1
6 600079 A-1888 PULLER FOR SUCTION COVER, ALU. &
PLATED
1
7 600077 A-1886 PRESSING PIN FOR DISTRIBUTOR,
STEEL
1
8 600175* R-904L SPARK PLUG WRENCH C/W ROD 1
9 600078 A-1887 ALUMINUM GUIDE FOR SHAFT
INSTALLATION
1
10 700588 A-5297 SUPPORT TOOL 1
11 600052 B-4084 PUMP BEARING PRESSING SLEEVE 1
12 600123 B-4085 PUMP BEARING EXTRACTOR TOOL 1
* 600175 contains 800084 (R-904) and 800082 (R-905)
Disassembly Procedure for Pump End
(Similar procedure for the 25-16S)
ID ITEM NO DESCRIPTION QTY
25-16S
QTY
18-16S
1 700994 DECAL-35 NO GREASE DECAL 1 1
2 700023 A-5536 PROTECTIVE CAP FOR 1-1/2"
DISCHARGE
1 1
3 700041 18-8 PUMP BODY FOR 18-16 - 1
3 700076 25-8 PUMP BODY FOR 25-16 1 -
4 800366 12-73 PLUG, 1/8" BRASS 2 2
5 800363 12-27 O-RING 1 1
6 600380 12-12A SUCTION NOZZLE-
INCLUDES 12-40
1 1
7 800359 12-39 SCREW 1/4-28X9/16 SLOT
FILLISTER SS
8 8
8 800360 12-38 LOCKWASHER 1/4 SPLIT SS 9 9
9 700022 A-5537 PROTECTIVE CAP FOR 2"
SUCTION
1 1
10 700029 12-40 BUSHING BEARING, BRONZE 1 1
11 700069 12-13 NOSE FOR SHAFT, ALU. 1 1
12 800343 12-42 SCREW 1/4-28X3/4 SLOT
FILLISTER NYLONLOCK SS
1 1
1. Remove shaft nose #11, by removing screw
#12 and lockwasher #8.
2. Remove screws #7, and lockwashers #8.
3. With tool 600079, remove suction cover #6.
4. Bend down lockwasher #23 from lock nut #24.
Secure the shaft #14 from rotating and remove
lock nut using tool 600175 or a 19 mm (3/4")
wrench. Discard lockwasher.
5. Remove screws #15.
6. Using an arbor press and tools 700532 and
700588, press out shaft assembly.
7. Using seal puller 700090, remove mechanical
rotary seal #18.
8. Using an arbor press and tools 600077 and
700588, remove all impellers and distributors.
This operation is done in jogging strokes of
press ram.
9. To remove bearing #17 from shaft, use an
arbor press and tool 600123.
Important: It is recommended to discard all O-
rings, lockwashers and nylon lock screws.
Kits containing replacements O-rings,
lockwashers and nylon lock screws are available
from WATERAX (item no 250227 and 250241).
1
2
3
4
5 (26)
6
7
8
9
11
12
10
(1/2)