Waterax STRIKER-II Series, Руководство пользователя

Страница: 9 / 32

Page 7
WATERAX STRIKER-2/3 Owner's Manual
04/2015 7
Fastening to Truck/Apparatus
When adding any equipment to a vehicle, follow all instructions and heed all warnings
provided by manufacturers of the apparatus and any third-party accessories. WATERAX
provides certain accessories used in vehicle-mount configurations of the STRIKER-2/3
series pumps. Follow all documentation that ships with any accessories you have ordered
such as vibration mounts or rails. Your company’s internal policies and guidelines must
also be followed.
Before installing the pump in a vehicle, plan for adequate access to any fill caps such as
those for oil and fuel, as well as any other part of the pump or engine that is frequently
accessed or inspected (valves, panels, primers, filters, etc.). Make note of components
that become hot when operating such as mufflers and engine blocks, and always ensure
a safe clearance around them.
Installing a Control Panel
See User Instructions shipped with the specific model of control panel you ordered for
your pump.
Using a Battery for Electric Starters and Control Panels
Some STRIKER-2/3 pumps require a battery to power electrical and electronic
components such as; starters, pump primers and control panels. Make sure to follow all
instructions and heed all warnings provided by your battery manufacturer. Refer to the
engine manual for battery requirements. Always follow safety guidelines set out by your
company. Never connect or disconnect a battery to a pump that is operating.