Waterax STRIKER-2/3, Руководство пользователя

Страница: 27 / 32

WATERAX STRIKER-2/3 Owner's Manual
09/2015 25
Pump End Technical Data
Threads
Discharge port 1-1/2” [38 mm] NPSH male
Suction (intake) port 2” [51 mm] NPSH male
Torque Values
Retaining ring screw 22-25 in-lbs 2.5-2.8 Nm
Shaft nose screw 32-36 in-lbs 3.6-4.1 Nm
Suction cover screw 32-36 in-lbs 3.6-4.1 Nm
Lock nut 12-50 250-260 in-lbs 28-29 Nm
Clearance Data and Limits
Impeller outside diameter 3.660-3.675 in 92.96-93.35 mm
Impeller hub outside diameter 2.105-2.113 in 53.47-53.67 mm
Impeller bore 0.669-0.671 in 16.99-17.04 mm
Impeller rear shroud diameter 0.908-0.918 in 23.06-23.32 mm
Impeller height (12-7) 1.525-1.532 in 38.74-38.91 mm
Impeller height (12-11) 1.334-1.343 in 33.88-34.11 mm
Distributor vane diameter 3.740-3.770 in 95.00-95.76 mm
Distributor bore 0.938-0.957 in 23.83-24.31 mm
Distributor rear hub diameter 2.127-2.140 in 54.03-54.36 mm
Pump body (volute) ball bearing housing bore 2.047-2.049 in 51.994-52.045 mm
Pump body (volute) mechanical rotary seal housing bore 1.810-1.812 in 45.974-46.025 mm
Suction cover hub diameter 2.127-2.140 in 54.03-54.36 mm
Suction cover bronze bearing bushing bore 0.7495-0.7505 in 19.037-19.063 mm
Suction cover rear face & bronze bushing perpendicularity 0.004 in 0.10 mm
Shaft ball bearing diameter 0.9844-0.9847 in 25.004-25.011 mm
Shaft bronze bushing bearing diameter 0.4980-0.5000 in 12.649-12.700 mm
Shaft maximum run-out 0.0035 in 0.089 mm
Bronze bushing bearing bore 0.501-0.503 in 12.725-12.776 mm