Water Specialist WS2HF, Руководство пользователя

Страница: 20 / 68

Page 20 WS2H, WS2HF, and WS3 Manual
SYSTEM SETUP 13
SYSTEM SETUP 13– Auxiliary Drive
• Selections allow enabling and timing control of the Auxilliary motorized drive circuit
• Requires a factory motorized drive to be connected to the AUX DRIVE connector
• Custom timing sequences can be confi gured under “Custom Motorized Drive Timing” at
the end of the programming section
Off
• The auxiliary drive output is disabled
No Hard Water Bypass
• Each unit has isolation to control system operation and will not supply service water
during regeneration
• Drive timing will bring the unit into service during fi ll
Separate Source
-Each unit has isolation to control system operation and will not supply service water
during regeneration
-Drive timing will keep units isolated through the entire regeneration sequence
SYSTEM SETUP SCREENS (CONTINUED)
SYSTEM SETUP 11A - Level Input option selected
Set a time duration of switch closure when Level option is selected
SYSTEM SETUP 12 - Meter Size Selection
2” METER: Setting for using a factory 2” meter
3” METER: Setting for using a factory 3” meter
VARIABLE METER: Used to set meter input off custom pulse rate, typically for non-factory
meters
VARIABLE SYSTEM METER: Only available on 2 unit alternators. The system shares 1
external meter which is connected to the LAG unit’s meter connection.
3” SYSTEM METER: Only available on 2 unit alternators. The system shares 1 external
meter which is connected to the LAG unit’s meter connection.
SYSTEM SETUP 12A
SYSTEM SETUP 12A - Set Meter Pulses / Gallon
-Only displays if “VARIABLE METER” or “VARIABLE SYSTEM METER” is selected in the
previous screen
-Set to the desired pulse rate of the installed metering device
SYSTEM SETUP 12
SYSTEM SETUP 11A
SET METER PULSES
8.0
PULSES PER GALLON
SET METER PULSES
8.0
PULSES PER GALLON