Water Specialist WS2HF, Руководство пользователя

Страница: 14 / 68

Page 14 WS2H, WS2HF, and WS3 Manual
SETTING TIME OF DAY AND DATE
SET TIME AND DATE
Accessed by pressing Set Clock while in the User
Screens. Use UP or DOWN arrows to scroll through
the available settings.
• REGEN TODAY
- Flashing indicates a regeneration has been manually set and can be turned off
by pressing and releasing the REGEN button
- A solid display indicates the regeneration has been scheduled by input
requirements and can’t be manually turned off
NOTIFICATIONS
• REGENERATION HOLD / REGENERATION START
- The display will fl ash “DP REGENERATION HOLD” or “DP REGENERATION
START”, depending on settings, to indicate an external switch closure to the
Aux. Input
• HIGH VOLUME
- Screen fl ashes indicating setpoint was reached when using relay outputs to
signal high water usage. All LED lights fl ash and the relay with that setpoint
closes.
• Screen and the relay are re-set by pressing any button
• System operates as normal behind the indicator screen.
- Only active if Timer 2 or Timer 3 is set to “Day & Gal” or “Day & Gal & System”
• NUMBER OF UNITS ERROR
- The LEAD unit of a system would fl ash an error screen alerting of a loss of
communication with a unit
- Check for proper operation and connectivity of the unit specifi ed as lost
communications
- Pressing any button will return the user to the # units set up screen to correct /
verify the value of units in the system. Exiting will re-establish communications
- Each unit of the system will regenerate, based on its settings, with hard water
bypass
ERRORS
• FUNCTIONAL ERROR
- “Error” and its code will fl ash on the display with a red backlight
- The unit attempts to return to service but will not regenerate until the error is
cleared
- See troubleshooting section for a description of possible error codes.
RETURN TO
NORMAL OPERATION
HIGH VOLUME
ERROR