Water Specialist WS1HR, Инструкция по эксплуатации

Страница: 24 / 59

Page 24 WS1HR & WS1.25HR Manual
User Display Settings
General Operation
When the system is operating, one of fi ve displays may be
shown. The displays normally rotate, however pressing NEXT
will pause on the selected display for 5 minutes. Pressing NEXT
will alternate between the displays. One of the displays is
always the current time of day. The second display is one of the
following: days remaining or volume remaining. Days remaining
is the number of days left before the system goes through a
regeneration cycle. Capacity remaining is the gallons that will
be treated before the system goes through a regeneration cycle.
Pressing the
▼
button while in the Capacity Remaining display
will decrease the capacity remaining in 10 gallon increments and
will also increase the volume used impacting the recorded values
in Diagnostics Steps 3D, 4D and 5D and Valve History, Step 4VH.
The third display shows the current treated water fl ow rate
through the system. The fourth display will show either dP or
hold if the dP switch is closed. The fi fth display indicates the
user should call for service. The fi fth display will not appear if
OFF is selected in Step 13S of OEM Softener System Setup or
Step 12F of OEM Filter System Setup. To clear the Service Call
reminder, press the
▲
and
▼
buttons simultaneously while CALL
is displayed.
If the system has called for a regeneration that will occur at the
preset time of regeneration, the words REGEN TODAY will
appear on the display.
If a water meter is installed, the word “Softening” or “Filtering”
fl ashes on the display when water is being treated (i.e. water is
fl owing through the system).
➟
➟
➟
or
➟
REGEN TODAY will
Flash if a regeneration
is expected “Tonight.”