Watchguard Firebox X10E, Руководство пользователя

Страница: 254 / 314

Chapter 13: Reviewing and Working with Log Files
232 WatchGuard Firebox System
2
On the toolbar, click the Add Service icon
(shown at right).
You can also select Edit
=>
Add Service. The Services
dialog box appears.
3
Expand Packet Filters .
4
Select WatchGuard-Logging . Click Add . Click OK .
5
On the Incoming tab, select Enabled and Allowed .
6
Under the To list, click Add .
7
Click NAT . Enter the external IP address of the main
office Firebox in the External IP Address box. Enter the
IP address of the log host behind the main office
Firebox in the
Internal IP Address box.
8
Click OK to close the Add Static NAT dialog box. Click
OK to close the Add Address dialog box. Click OK to
close the WatchGuard-Logging Properties dialog box.
9
Save the new configuration to the main office Firebox.
On the remote office Firebox:
1
Open Policy Manager with the current configuration
file.
2
Select Setup => Logging . Click Add .
3
Enter the external IP address of the main office Firebox
and log encryption key of the log host on the network
protected by the main office Firebox.
4 Click OK to close the Add IP Address dialog box. Click
OK again to close the Logging Setup dialog box.
5
Save the new configuration to the remote office
Firebox.
On the log host:
You must use the same log encryption key on the remote
office Firebox as is configured on the log host protected by
the main office Firebox. To modify the log encryption key
on the log host, see “Setting log encryption keys” on
page 231.
You should see the IP address for the remote office Firebox
in the list as soon as it connects. However, it will not