Watchguard Firebox X10E, Руководство пользователя

Страница: 144 / 314

Chapter 8: Configuring Filtered Services
122 WatchGuard Firebox System
7
In the Client Port text box, select an option from the
drop-down list. Note that you can select a range of
port numbers. The following options are available:
Ignore
Source port can be any number (0—65565). (If you
are not sure which port setting to use, choose this
option.)
Secure
Source port can range from 0—1024.
Port
Source port must be identical to the destination
port, as listed in the
Port
number field of the
destination service’s Properties dialog box,
Properties tab (shown below).
Client
Source port can range from 1025—65565.
8
In the Port field, enter the port number. If you are
entering a range, enter the lowest number of the range.
9 In the To field, enter the highest number of the range.
(If you are not entering a range, leave this field blank.)
10
Click OK .
Policy Manager adds the port configuration to the New Service
dialog box. An example of how this dialog box might look
appears in the following figure. Verify that the name, description,
and configuration of this service are correct. If necessary, click
Add to configure an additional port for this service. Repeat the
process until all ports for the service are configured.