Watchguard Firebox X10E, Руководство пользователя

Страница: 104 / 314

Chapter 6: Managing and Monitoring the Firebox
82 WatchGuard Firebox System
6
To cancel the changes you have made in this dialog box
since opening it, click
Reset to Defaults .
Copying messages to another application
To copy a log message so you can paste it into another
application such as email or Notepad, right-click the mes-
sage and select
Copy Selection . You can then open up the
other application and paste in the message.
Copying or analyzing deny messages
You can use several tools to copy and analyze deny mes-
sages:
•
To copy a deny message and paste it into an
application, use the procedure in the previous section.
• To copy the source or destination IP address of a deny
message so you can paste it into another application,
right-click the message, select
Source IP => Copy or
Destination IP => Copy .
• To issue the ping command to a source or destination
IP address of a deny message, right-click the message
and select
Source IP => Ping or Destination IP => Ping .
(When you issue this command, you are prompted to
enter the configuration passphrase.)
• To issue a traceroute command to a source or
destination IP address of a deny message, right-click
the message and select
Source IP => Trace Route or
Destination IP => Trace Route . (When you issue this
command, you are prompted to enter the configuration
passphrase.)
Performing Basic Tasks with System Manager
The basic tasks you perform with System Manager are:
•
Running the QuickSetup Wizard