This will bring up the Internet Protocol Version 4 Properties. In here, click on the bubble next to Use
the following IP address and enter the IP address that you would like to use for the DVR. Our
recommended default is
192.168.4.100 and no Default Gateway is needed
. The DNS server addresses
are not used with the camera network. Make sure that this address does not conflict with any other
addresses on the store network.
Once done, hit OK. Then hit OK again and, finally, Close. Close out of the Local Area Connections
window to get back to the Desktop. Now you are ready to begin setting up your IP cameras.
Watcherproducts.com ♦ Watcher Products ♦ 877-289-2824 7
