and record.
4. Upload to Center / Report to Center
– This sends the motion detection signal to the DVR. It should
also be checked.
Once you have configured the motion settings, click the Save button in the bottom right and then Exit.
Your camera should now be detecting and recording motion in the DVR. This is apparent by the little
“running man” icon in the upper-right hand corner of the camera window.
Repeat steps 1 – 7 for each IP camera that you would like to add to the DVR.
Watcherproducts.com ♦ Watcher Products ♦ 877-289-2824 19
