**
Note
** Make sure that the camera is on the same IP scheme as the camera network you setup at the
beginning of this guide. If the recommended DVR IP address was used (192.168.4.100), it is
recommended to start the cameras at IP address 192.168.4.150 and continue up for each additional
camera.
Example:
Camera 1 = 192.168.4.150
Camera 2 = 192.168.4.151
Camera 3 = 192.168.4.152
…
…
Camera 10 = 192.168.4.159
Select the first set of numbers in the IP Address field (192) by double-clicking it. The background will
turn blue and you can begin typing the IP address of the camera. Whenever you hit period (.), the
selection will automatically change to the next set of numbers in the address. This makes it easier to
type the IP sequentially using the number keys on the keypad. Leave the port on it's default value. It
may be 37777, 8000, etc. but the software correctly puts the proper port number for each version of
camera (NV Series, DH Series, DG Series, etc.). You will also have to change the password (on the
left) to
admin123.
The Mask Address should be at 255.255.255.0
Watcherproducts.com ♦ Watcher Products ♦ 877-289-2824 11
