Wasp WWS650, Руководство по продукции

Страница: 66 / 316

Enter/Exit Programming Mode
56 Wasp WWS650
Label ID
A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the
ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology
type. It can be appended previous to or following the transmitted bar code data depending
upon how this option is enabled. This feature provides options for configuring custom Label
IDs or individually per symbology (see "Individually Set Label ID" on page 57). If you wish to
program the reader to always include an industry standard label identifier for ALL symbology
types, see the previous feature "Global AIM ID" on page 53.
See Label ID, starting on page 249 of “References” for more information on setting this feature.
Label ID: Pre-Loaded Sets
The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded Sets, starting on
page 249 for details on the USA set and EU set.
CAUTION
$AE(CR)
Label ID Pre-loaded Set = USA Set
$Ae(CR)
Label ID Pre-loaded Set = EU Set
DEFAULT
When changing from one Label ID set to another, all other reader configuration set-
tings, including the host interface type, will be erased and set to the standard factory
defaults. Any custom configuration or custom defaults will be lost.