Wasp WWS650, Руководство по продукции

Страница: 175 / 316

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 165
Code 93 Set Length 1
Specifies one of the bar code lengths for Code 93 Length Control on page 164 . Length 1 is the
minimum label length if in Variable Length on page 245 Mode, or the first fixed length if in
Fixed Length on page 245 Mode. Length includes the bar code’s data characters only. The
length can be set from 01 to 50 characters.
Table 19 provides some examples for setting Length 1. See page 245 for detailed instructions
on setting this feature.
Table 19. Code 93 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC9L1
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character