Wasp WWS650, Руководство по продукции

Страница: 170 / 316

Enter/Exit Programming Mode GS1 DataBar™ Expanded
160 Wasp WWS650
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the bar code lengths for GS1 DataBar™ Expanded Length Control
on page 158 . Length 2 is the maximum label length if in Variable Length on page 245 Mode, or
the second fixed length if in Fixed Length on page 245 Mode. Length includes the bar code’s
data characters only. The length can be set from 1 to 74 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 18 provides examples for setting Length 2. See page 245 for detailed instructions on set-
ting this feature.
Table 18. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (ignore second
length)
07 Characters 52 Characters 74 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘5’ and ‘2’ ‘7’ and ‘4’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
74 = Length 2 is 74 Characters