Wasp WWS650, Руководство по продукции

Страница: 185 / 316

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 175
Plessey Set Length 2
This feature specifies one of the bar code lengths for Plessey Length Control on page 173 .
Length 2 is the maximum label length if in Variable Length on page 245 Mode, or the second
fixed length if in Fixed Length on page 245 Mode. Length includes the bar code’s check, data,
and full-ASCII shift characters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 24 provides examples for setting Length 2. See page 245 for detailed instructions on set-
ting this feature.
Table 24. Plessey Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT PLESSEY LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CPLL2
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters