Wasp WWS650, Руководство по продукции

Страница: 132 / 316

Enter/Exit Programming Mode Code 128
122 Wasp WWS650
Code 128 Set Length 2
This feature specifies one of the bar code lengths for Code 128 Length Control on page 120 .
Length 2 is the maximum label length if in Variable Length on page 245 Mode, or the second
fixed length if in Fixed Length on page 245 Mode. Length includes the bar code’s data charac-
ters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 6 provides examples for setting Length 2. See page 245 for detailed instructions on set-
ting this feature.
Table 6. Code 128 Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore This
Length)
07 Characters 15 Characters 80 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ and 0’
5 Scan ENTER/EXIT PROGRAMMING MODE
.
$CC8L2
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
80 = Length 2 is 80 Characters