Wasp Wasp WDI7500, Руководство по продукции

Страница: 220 / 310

Enter/Exit Programming Mode
210 Wasp WDI7500/WWS750
DIRECT RADIO AUTOLINK
This feature enables/disables the ability to link a wireless handheld to a
base station without scanning the Unlink label first.
DEFAULT
$CBTDL00(CR)
Direct Radio Link = Unlink Label Required
$CBTDL01(CR)
Direct Radio Link = Automatic Unlinking
RF ADDRESS STAMPING
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be trans-
mitted to the host and, if so, at what position with respect to the label data.
See page 261 in “References” for detailed information and examples for set-
ting this feature.
DEFAULT
$CBTAS00(CR)
Source Radio Address Transmission = Do Not Include
$CBTAS01(CR)
Source Radio Address Transmission = Prefix
When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44