Wireless Features
Product Reference Guide
261
Wireless Features
Automatic Configuration Update
When this feature is enabled, the base station and reader will keep their
configurations synchronized. If a reader's configuration is altered by reading
programming labels, this change is automatically transferred and updated in
a linked base station. Likewise, if the base station's configuration is changed
by host commands, then the reader's configuration will automatically be
updated if this feature is enabled.
RF Address Stamping
Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label
data and radio address when address stamping is enabled.
This feature only applies if
"Source Radio Address Transmis-
on page 210 is enabled.
Follow these instructions to select the delimiter character:
1. Determine the desired character, then find its hexadecimal equivalent
on the
on the inside back cover. A setting of 00 specifies no
delimiter character.
2. Go to
and scan the ENTER/EXIT PROGRAMMING MODE bar-
code to enter Programming Mode.
3. Scan the barcode: SET SOURCE RADIO ADDRESS DELIMITER CHARAC-
TER.
4. Scan the appropriate two digits from the keypad in
, that represent the hexadecimal characters which were determined
in the steps above. You will hear a two-beep indication after the last
character.
If you make a mistake before the last character, scan the CANCEL bar-
code to abort and not save the entry string. You can then start again
at the beginning.
5. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit.
Table 47. Source Radio Address Delimiter Character Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
No delimiter
character
, (comma)
- (dash)
/ (slash)
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SET SOURCE RADIO ADDRESS DELIMiTER CHARACTER
4
Scan Two Characters From
‘0’ and ‘0’
‘2’ and ‘C’
‘2’ and ‘D’
‘2’ AND ‘F’
5
Scan ENTER/EXIT PROGRAMMING MODE
Содержание Wasp WDI7500
Страница 1: ...Wasp WDI7500 Wasp WWS750 2D Duraline USB or Wireless Barcode Scanner Product Reference Guide...
Страница 10: ...viii Wasp WDI7500 WWS750 NOTES...
Страница 282: ...Sample Barcodes 272 Wasp WDI7500 WWS750 Sample Barcodes continued Code 32 Codabar 13579 Code 93 Code 11 123456789...
Страница 308: ...Microsoft Windows Codepage 1252 Product Reference Guide 298 NOTES...