WÄRTSILÄ WARTSILA32, Руководство по эксплуатации продукта, Страница: 49 / 254

ME
SCR
mode
DE
SCR
mode
AE
SCR
mode
ME
IMO
Tier 2
DE
IMO
Tier 2
AE
IMO
Tier 2
Wärtsilä 12V32
750
580 750
580 750
580 750
580 750
580 750
580 RPM
kW/cyl
Engine speed
Cylinder output
180 181 183 179 180 182
g/kWh Fuel consumption at 85% load, MDF
180 181 183 179 180 182
g/kWh Fuel consumption at 75% load, MDF
181 189 190 179 185 189
g/kWh Fuel consumption at 50% load, MDF
26.7 26.6 26.7 26.7 26.6 26.7
kg/h Clean leak fuel quantity, MDF at 100% load
5.3 5.3 5.3 5.3 5.3 5.3
kg/h Clean leak fuel quantity, HFO at 100% load
Lubricating oil system
500 500 500 500 500 500
kPa Pressure before bearings, nom. (PT 201)
40 40 40 40 40 40
kPa Suction ability main pump, including pipe
loss, max.
50 50 50 50 50 50
kPa Priming pressure, nom. (PT 201)
35 35 35 35 35 35
kPa Suction ability priming pump, including pipe
loss, max.
63 63 63 63 63 63
°C Temperature before bearings, nom. (TE 201)
81 81 81 81 81 81
°C Temperature after engine, approx.
129 129 129 129 129 129
m³/h Pump capacity (main), engine driven
110 110 110 110 110 110
m³/h Pump capacity (main), stand-by
38.0 /
45.9
38.0 /
45.9
38.0 /
45.9
38.0 /
45.9
38.0 /
45.9
38.0 /
45.9
m³/h Priming pump capacity, 50Hz/60Hz
3.0 3.0 3.0 3.0 3.0 3.0
m³ Oil volume, wet sump, nom.
9.4 9.4 9.4 9.4 9.4 9.4
m³ Oil volume in separate system oil tank, nom.
0.35 0.35 0.35 0.35 0.35 0.35
g/kWh Oil consumption (100% load), approx.
2760 2760 2760 2760 2760 2760 l/min Crankcase ventilation flow rate at full load
0.1 0.1 0.1 0.1 0.1 0.1 kPa Crankcase ventilation backpressure, max.
8.5...9.5 8.5...9.5 8.5...9.5 8.5...9.5 8.5...9.5 8.5...9.5 liters Oil volume in turning device
1.9 1.9 1.9 1.9 1.9 1.9 liters Oil volume in speed governor
Cooling water system
High temperature cooling water system
250 +
static
250 +
static
250 +
static
250 +
static
250 +
static
250 +
static
kPa Pressure at engine, after pump, nom. (PT 401)
530 530 530 530 530 530
kPa Pressure at engine, after pump, max. (PT 401)
77 77 77 77 77 77
°C Temperature before cylinders, approx. (TE
401)
96 96 96 96 96 96 °C HT-water out from engine, nom (TE432)
100 100 100 100 100 100
m³/h Capacity of engine driven pump, nom.
150 150 150 150 150 150 kPa Pressure drop over engine, total
100 100 100 100 100 100
kPa Pressure drop in external system, max.
70...150 70...150 70...150 70...150 70...150 70...150 kPa Pressure from expansion tank
0.74 0.74 0.74 0.74 0.74 0.74
m³ Water volume in engine
Low temperature cooling water system
250 +
static
250 +
static
250 +
static
250 +
static
250 +
static
250 +
static
kPa Pressure at engine, after pump, nom. (PT 451)
Wärtsilä 32 Product Guide - a21 - 7 September 2016 3-25
3. Technical Data Wärtsilä 32 Product Guide