WÄRTSILÄ WARTSILA32, Руководство по эксплуатации продукта, Страница: 39 / 254

DE
SCR
mode
AE
SCR
mode
DE
IMO
Tier 2
AE
IMO
Tier 2
Wärtsilä 9L32
720
560 720
560 720
560 720
560 RPM
kW/cyl
Engine speed
Cylinder output
182 183 180 182
g/kWh Fuel consumption at 75% load, MDF
190 191 186 190
g/kWh Fuel consumption at 50% load, MDF
19.2 19.3 19.2 19.3
kg/h Clean leak fuel quantity, MDF at 100% load
3.8 3.9 3.8 3.9
kg/h Clean leak fuel quantity, HFO at 100% load
Lubricating oil system
500 500 500 500
kPa Pressure before bearings, nom. (PT 201)
30 30 30 30
kPa Suction ability main pump, including pipe loss, max.
50 50 50 50
kPa Priming pressure, nom. (PT 201)
30 30 30 30
kPa Suction ability priming pump, including pipe loss,
max.
63 63 63 63
°C Temperature before bearings, nom. (TE 201)
79 79 79 79
°C Temperature after engine, approx.
108 108 108 108
m³/h Pump capacity (main), engine driven
96 96 96 96
m³/h Pump capacity (main), stand-by
21.6 /
25.9
21.6 /
25.9
21.6 /
25.9
21.6 /
25.9
m³/h Priming pump capacity, 50Hz/60Hz
2.3 2.3 2.3 2.3
m³ Oil volume, wet sump, nom.
6.8 6.8 6.8 6.8
m³ Oil volume in separate system oil tank, nom.
0.35 0.35 0.35 0.35
g/kWh Oil consumption (100% load), approx.
2060 2060 2060 2060 l/min Crankcase ventilation flow rate at full load
0.1 0.1 0.1 0.1 kPa Crankcase ventilation backpressure, max.
8.5...9.5 8.5...9.5 8.5...9.5 8.5...9.5 liters Oil volume in turning device
1.9 1.9 1.9 1.9 liters Oil volume in speed governor
Cooling water system
High temperature cooling water system
250 +
static
250 +
static
250 +
static
250 +
static
kPa Pressure at engine, after pump, nom. (PT 401)
530 530 530 530
kPa Pressure at engine, after pump, max. (PT 401)
77 77 77 77
°C Temperature before cylinders, approx. (TE 401)
96 96 96 96 °C HT-water out from engine, nom (TE402) (single stage
CAC)
96 96 96 96 °C HT-water out from engine, nom (TE432) (two stage
CAC)
85 85 85 85
m³/h Capacity of engine driven pump, nom.
100 100 100 100 kPa Pressure drop over engine, total (single stage CAC)
150 150 150 150 kPa Pressure drop over engine, total (two stage CAC)
100 100 100 100
kPa Pressure drop in external system, max.
70...150 70...150 70...150 70...150 kPa Pressure from expansion tank
0.56 0.56 0.56 0.56
m³ Water volume in engine
Low temperature cooling water system
Wärtsilä 32 Product Guide - a21 - 7 September 2016 3-15
3. Technical Data Wärtsilä 32 Product Guide