WÄRTSILÄ WARTSILA32, Руководство по эксплуатации продукта, Страница: 25 / 254

3. Technical Data
3.1 Wärtsilä 6L32, 720 rpm
DE
SCR
mode
AE
SCR
mode
DE
IMO
Tier 2
AE
IMO
Tier 2
Wärtsilä 6L32
720
560 720
560 720
560 720
560 RPM
kW/cyl
Engine speed
Cylinder output
3360 3360 3360 3360 kW Engine output
2.9 2.9 2.9 2.9 MPa Mean effective pressure
Combustion air system (Note 1)
6.02 6.02 6.02 6.02 kg/s Flow at 100% load
45 45 45 45 °C Temperature at turbocharger intake, max.
55 55 55 55 °C Air temperature after air cooler (TE 601)
Exhaust gas system (Note 2)
6.2 6.2 6.2 6.2 kg/s Flow at 100% load
5.2 5.2 5.4 5.4 kg/s Flow at 85% load
4.8 4.8 5.0 5.0 kg/s Flow at 75% load
3.3 3.3 3.3 3.3 kg/s Flow at 50% load
350 350 350 350 °C Temperature after turbocharger, 100% load (TE 517)
340 340 330 330 °C Temperature after turbocharger, 85% load (TE 517)
340 340 330 330 °C Temperature after turbocharger, 75% load (TE 517)
380 380 380 380 °C Temperature after turbocharger, 50% load (TE 517)
5.0 5.0 5.0 5.0 kPa Backpressure, max.
629 629 629 629
mm Calculated pipe diameter for 35m/s
Heat balance (Note 3)
430 430 430 430 kW Jacket water, HT-circuit
766 766 766 766 kW Charge air, HT-circuit
414 414 414 414 kW Charge air, LT-circuit
388 388 388 388 kW Lubricating oil, LT-circuit
110 110 110 110 kW Radiation
Fuel system (Note 4)
700±50 700±50 700±50 700±50 kPa Pressure before injection pumps (PT 101)
4.3 4.3 4.3 4.3 m 3 /h Engine driven pump capacity (MDF only)
3.4 3.4 3.4 3.4 m
3
/h Fuel flow to engine (without engine driven pump),
approx.
16...24 16...24 16...24 16...24 cSt HFO viscosity before engine
140 140 140 140 °C HFO temperature before engine, max. (TE 101)
2.0 2.0 2.0 2.0 cSt MDF viscosity, min
45 45 45 45 °C MDF temperature before engine, max. (TE 101)
183 184 182 182
g/kWh Fuel consumption at 100% load, HFO
184 184 181 182
g/kWh Fuel consumption at 85% load, HFO
184 184 182 182
g/kWh Fuel consumption at 75% load, HFO
Wärtsilä 32 Product Guide - a21 - 7 September 2016 3-1
3. Technical Data Wärtsilä 32 Product Guide