WÄRTSILÄ VASA 6L32, Инструкция по эксплуатации

Страница: 340 / 394

23.2.4.2 Sensors for monitoring and alarm
The following standard set of sensors for monitoring, alarm and
safety are mounted on the engine.
Code Name Type
LS103A Fuel oil leakage, injection pipe b
LS106A Fuel oil leakage, clean fuel b
LS108A Fuel oil leakage, dirty fuel flywheel end b
PT101 Fuel oil pressure, inlet a
TE101 Fuel oil temperature, inlet a
LS204 Lube oil level b
PT201 Lube oil pressure, inlet a
PT241 Lube oil pressure, filter inlet a
PDY243 Lube oil filter pressure difference
1)
a
TE201 Lube oil temperature, inlet a
TE231 Lube oil temperature, LOC inlet a
PT301 Start air pressure a
PT311 Control air pressure a
PT401 HT water pressure, inlet a
PT471 LT water pressure, inlet a
TE401 HT water temperature, inlet a
TE402 HT water temperature, outlet a
TE432A HT water temperature, CAC outlet a
TE471 LT water temperature, CAC inlet a
TE472 LT water temperature, CAC outlet a
TE482 LT water temperature, LOC outlet a
TE511 Exhaust gas temperature, Turbo inlet
2)
a
TE517 Exhaust gas temperature, Turbo outlet a
TE51CA... Exh. gas temp., cylinder outlet
3)
a
PT601 Charge air pressure, inlet a
TE601 Charge air temperature, inlet a
TE700... Main bearing 0 temperature
4)
a
TE711A... Cylinder liner temperature 1
3)
a
GT165 Fuel rack position a
GS171 Stop lever in stop position b
ST173 Engine speed a
ST174 Engine speed, backup system a
SE518 Turbocharger speed a
GS792 Turning gear engaged b
PSZ201 Lube oil pressure, inlet (backup system) b
a = analogue sensor
b = binary (on/off) sensor
1)
Calculated value (not a separate sensor)
2)
1...4 pcs depending on exhaust gas system
3)
2 pcs/cylinder
4)
(n + 2) pcs, where n = number of cylinders
23 Instrumentation and Automation 32-200115/II
23-6 WÄRTSILÄ 32