WÄRTSILÄ LAZ 5100, Техническое руководство

Страница: 75 / 79

Technical Manual LAZ 5100 / ES 5100
INSTALLATION, CARE AND MAINTENANCE
TH 52 603 8001 EN Rev.: S Technical Manual LAZ 5100 / ES 5100 5-13
To alter the Protocol, press the following keys:

Call up the
INTERFACES SUB-MENU
as described previously

CURSOR
(6x, to mark the word
Protocol
)

ENTER
(1x, to mark the selected Protocol)

CURSOR
or (to alter the Protocol)

ENTER
(1x, to confirm selection)

ESCAPE
(2x, to leave the
MENU
)
Note, that the Protocol ELAC is only applicable for dual channel units, see
also chapter 0 Description of Interfaces.
To alter the recording display time on the LCD – Screen, press the following keys

Call up the
Display 15 min Sub Menu
as described previously

Enter
(1x), to mark “ON” or “OFF”

Cursor
to alter the setting

Enter
(1x), to confirm the selection

Escape
(2x), to leave the
Menu
Once the initial system settings have been made they need only be altered if for
example a second transducer is added or if the original transducer is replaced with
one of a different frequency.
If a second transducer is added at a later date, parameters must be entered in the
channel 2 sub-menu. The parameters for channel 1 must not be altered.
(See installation instruction UN 52 590 4001 for the integration of the second
channel).
If the original transducer is replaced and the replacement is fitted at a different
location, the parameters must be altered accordingly.
5.1.5 Power Adjust
This adjust feature allows the authorised service person to alter the transmitting power
according to cable length on board.