WÄRTSILÄ LAZ 5100, Техническое руководство

Страница: 14 / 79

Technical Manual LAZ 5100 / ES 5100
GENERAL INFORMATION
1-6 Technical Manual LAZ 5100 / ES 5100 TH 52 603 8001 EN Rev.: S
1.7 Requirements for the Workplace
In addition to the mandatory national and company-specific regulations, safety and
accident prevention regulations and recognised technical regulations applicable at the
point of use, the following requirements for the workplace must be observed:

Keep the workplace clean and tidy at all times.
- Remove packing material and waste immediately.
- Keep the workplace free from oil and grease.

When working on components with an electrostatic hazard, such work must be
carried out at an ESD workplace which is equipped in accordance with the
applicable regulations.

Personal protective equipment must be used in accordance with the applicable
regulations.

Before use, check hoists and lifting gear for:
- permissible load,
- any damage.

Only use material and tools that are in a faultless condition,

Ensure that the following conditions are met:
- stable installation facility at an appropriate working height,
- required tools and measuring devices are available and ready for use,
- all required material for the proper performance of the work is available and
ready for use.
1.8 Replacement Parts
Replacement parts must correspond to the technical requirements specified
by the manufacturer.
This is only guaranteed in the case of original replacement parts.
Work (e.g. installation work) on or with the system must only be carried out
by authorised specialist personnel!
Liability is categorically rejected for the following faults:

Damage resulting from the selection and use of impermissible or incorrect
replacement or reserve parts,

Damage resulting from the use of replacement or reserve parts that have not been
expressly approved by the manufacturer of this product,

Damage resulting from the use of unsuitable tools or measuring and test
equipment.