WÄRTSILÄ JOVYTEC POWERMASTER PMS 6000, Руководство по эксплуатации, Страница: 19 / 38

Wärtsilä JOVYTEC PMS 6000 BAX 2935_en - 18 -
6. Electrical connection
6.1 Electrical connection of the UPS unit
The UPS unit in the series JOVYATLAS POWERMASTER S 6000 is simply connected via the installed
terminal rail on the rear side of the UPS. Before the terminal rail is ready for cable connection, please
dismantle the cover plate. This cover plate has three cut outs, where it is possible to put the connection
cables through.
Graphic 11: Connection Area POWERMASTER S 6000
BYPASS INPUT OUTPUT
L N L N
J
L N
OFF
0
OFF
0
OFF
0
OFF
0
PE PE PE
Ausgangssicherung Eingangssicherung
F1 F2
INPUT FUSE OUTPUT FUSE
P L E A S E N O T E
!
Only trained personnel are allowed to work on the UPS unit.
Observe all correponding safety regulations.
Marking of cables is to be according to DIN EN 60445!
When connecting to the UPS unit, ensure use of an adequately sized protective-
conductor connection!
P L E A S E N O T E
!
When working on the batteries it is possible for dangerous situations to arise
due to a high DC voltage and high short-circuit currents.
This work on the device must only be conducted when accompanied by use of
suitable protective measures such as insulated tools, eye and hand protection
etc.