Page 9
For technical questions, please call 1-888-866-5797.
Item 56478
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
Workpiece Stops
1. Use the Workpiece Stop, part of the Workpiece
Support, to make multiple cuts of the same
length. Raise one Stop so that one end of
the workpiece rests on the Stop shelf.
2. Position the Workpiece Support as explained
in “Workpiece Supports” on previous page.
3. Position length of Extension Arm as explained
in “Extension Arms” on previous page.
cautiOn!
Do not use both Workpiece
Stops at the same time or saw blade may
bind in the workpiece when cutting.
4. Tighten all Lock Knobs before use.
Not using Stop,
workpiece rests
flat on top of
Supports.
Using Stop, one
Support raised
so one side of
workpiece rests
on Stop shelf.
Workpiece
Stop
Workpiece Support