Page 7
For technical questions, please call 1-888-866-5797.
Item 56478
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
3. Place the Miter Saw in the chosen location on
the platform and use mounting holes in the miter
saw base as a template to mark mounting hole
locations on the plywood. Remove saw and
drill holes at marked locations of an appropriate
size for the mounting hardware to be used. Use
the largest diameter hardware possible.
4. Position the two Mounting Brackets (21) to align with
the mounting holes (drilled in step 2) on the platform.
note:
The two Mounting Brackets
must be parallel to each other.
5. Attach the two Mounting Brackets to the platform
using four Carriage Bolts (29), Flat Washers (30),
Spring Washers (31), and Nuts (32).
6. Mount Miter Saw to plywood platform using
four Bolts (grade 5 or better), Flat Washers,
Lock Washers, and Nuts (sold separately).
Tighten all hardware securely.
7. Proceed to installing the Miter Saw onto
the Main Frame, step 10 on page 6.
nut (32)
Spring
Washer (31)
Flat Washer
(30)
carriage Bolt
(29)
nut, Lock
Washer,
Flat Washer,
Bolt (sold
separately)
Miter Saw
platform
Mounting
Bracket (21)
components and controls
Lock
Knob
Lock
Knob
Workpiece
Support
Workpiece
Stop
Mounting
Brackets
Lock
Knob
Lock
Knob
Lock
pin
Lock
pin
Extension
arm
Extension
arm
Main
Frame
Workpiece
Support
Workpiece
Stop
note:
To show detail on Mounting Brackets, view
shown is from side opposite Miter Saw operation.