
Page 8
For technical questions, please call 1-888-866-5797.
Item 56478
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
Operation
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO prEVEnt SEriOuS inJury:
1.
read the Miter Saw manufacturer’s instruction manual before use.
2.
Bolt the Miter Saw securely to the mounting brackets on the Miter
Saw Stand and test work set-up for stability before use.
3.
Engage both Levers beneath the Mounting Brackets fully before using Miter Saw.
4.
use as a miter saw stand only - do not use with any other type of power tool
5.
Do not exceed listed weight capacity.
6.
Do not use on uneven or slippery surfaces.
Extension arms
1. To use the Extension Arms to provide
support for longer workpieces, loosen
the Lock Knob to unlock the Arm.
2. Extend the Extension Arm to the desired length but
make sure the line marked on the arm is not visible.
3. Tighten the Lock Knob to secure
the Extension Arm in place.
Lock
Knob
Line
should not
be visible
Workpiece Supports
1. To adjust the height of the Workplace
Supports, loosen the Lock Knob at the end of
either Extension Arm and raise the Support
so that it is level with the saw table.
cautiOn!
Ensure that the workpiece lays flat on
saw table or saw blade may bind when cutting.
2. Tighten the Lock Knob and adjust the other
Workpiece Support in the same manner.
Lock
Knob
Workpiece
Support