WARRIOR 56478 Скачать руководство пользователя страница 10

Page 10

For technical questions, please call 1-888-866-5797.

Item 56478 

        

Sa
FE
ty

Op
E

ra
ti

O

n

Maint

E

nanc

E

S

E

tup

Maintenance

  procedures not specifically explained in this manual must 

be performed only by a qualified technician.

tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: 
turn the power switch of the miter saw mounted on the Miter Saw Stand off, and unplug 
the tool from its electrical outlet before performing any procedure in this section.

tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE: 
Do not use damaged equipment.  if abnormal noise or vibration occurs, 
have the problem corrected before further use.

1. 

BEFOrE EacH uSE,

 inspect the general condition of the Miter Saw Stand.  Check for:

•  loose hardware
•  misalignment or binding of parts
•  cracked or broken parts
•  loose or improper mounting of the miter saw
•  any other condition that may affect its safe operation.

2. 

aFtEr uSE,

 wipe external surfaces of the Stand with clean cloth.

3.  Periodically, lightly lubricate all moving parts of the Miter Saw Stand.

record product’s Serial number Here: 
note:

 If product has no serial number, record month and year of purchase instead.

note:

 Some parts are listed and shown for illustration purposes only, 

and are not available individually as replacement parts.

pLEaSE rEaD tHE FOLLOWinG carEFuLLy

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM 
IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR DISTRIBUTOR 
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS 
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE 
ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY 
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND 
LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY 
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS 
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Содержание 56478













Отзывы: