WARPP INTIG-PULSE series, Руководство по эксплуатации

Страница: 7 / 24

-
７
-
4.1
For MMA welding:
(1) Connect welding cable to welding machine tightly.
(2) Reset the circuit beaker on the rear panel of the machine
(3) Connect the input power cable to the disconnected switchboard,
then power on.
4.2
For TIG welding:
(1) Well-connect welding cable with welder (+), and well-connect TIG
torch with welder (-).
(2) Well-connect gas hose and gas source; well-connect water pipe and
water source when using water cooled torch.
(3) Close air switch of the welder.
(4) Connect 3 phase cable with the switchboard and power it on.
Principle in Brief
Fig 2 Block diagram of principle
Fig 3a TIG Output Characteristic Fig 3b SMAW output characteristic
3~380V/50Hz
Rectifier HF inverter Main transformer Rectifier Filter
Control circuit
+