WARPP INTIG-PULSE series, Руководство по эксплуатации

Страница: 5 / 24

-
５
-
Avoid being hurt by moving parts
z Never let the finger, hair, and cloth near the rotary cooling fan
and wire feeder rollers.
z
When feeding wire, don’t let the bottom of gun near your eyes,
face and body, to prevent being harmed by wire.
Avoid gas bottle falling or gas regulator breaking
z Gas bottle must be firmly fixed on the ground, else if injure will
exerts on.
z Never place bottle under high temperature or sun light.
z Never let your face near gas outlet while turning on the gas valve
to prevent from being hurt by pressure gas.
z
Customer should use gas regulator provided by our company, and
comply with the proper instruction.
Avoiding being hurt by welders while in transport
z When moving the welding machine by fork-lift truck or crane,
nobody can be allowed for standing downright the route of the
moving welder, in case being hurt by the falling welder.
z The ropes or wires which used for hanging up the welding
machine must be strong enough to withstand corresponding
tension strength. The rope or wire inclination hanging on the
tackle must be no more than 30°.
Installation
1. Installing situation:
(1) Must place welding machine in the room where is no straight
sunlight, no rain, less dust, low humidity, and temperature range
of -10
～
+40
(2) The gradient of ground must be no more than 15°
(3) Ensure no wind at the welding position, or use screen to block
the wind.