Warmhaus ENERWA, Руководство пользователя

Страница: 10 / 24

10
warmhaus.com
2.2. SELECTION OF ON/OFF/STANDBY AND SUMMER/WINTER MODES
Use V automat switch for interrupting the electrical connection of combi boiler. The temperature value when electricity is supplied to the device is the
temperature value of water in the installation.
2.2.1. On/Off/Standby Positions

Use V automat (fuse) switch for shutting ON/OFF the
electrical connection of combi boiler.
2.2.2. Operation at Winter Position
At that position, combi boiler operates both for heating the environment and
providing hot tap water.
2.2.3. Operation at Summer Position
Combi Boiler only operates for heating the Domestic Hot Water at that
position. In order to switch to DHW position;
When the combi boiler is started for the
first time, screen displays nG letter and then
a number (for instance 24) indicating kW
power of the device
and screenlight is closed. Now, combi boiler
is at STANDBY position. The temperature
value when electricity is supplied to the
device is the temperature value of water in
the installation.
Then, OFF letter is displayed,
OFF
OFF
Radiator temperature is adjusted with button
(3) and Domestic Hot Water temperature
adjustment is made with button(4) and this
temperature is displayed by indicator (7) on
the screen.
In order to shuton the combi boiler, hold
MODE button, whereas a circle starts on the
screen, release the button when circle is
completed.
In such case, combi boiler initially gets in the
Radiator position, its symbol flashes at left
top corner of screen and existing radiator
installation temperature is displayed on the
screen and then screen light turns off. At
that position, you can adjust the temperature
between 35 – 80 °C with the Radiator
temperature adjustment button (3).
Temperature value increases when button
is rotated clockwise or decreases when
rotated counter clockwise . The adjusted
value shall be confirmed after flashing for
4-5 seconds after releasing the button and
continues to display the temperature value in
the installation.
{If you have a ground heating system, as our Authorized Service
adjust your combi boiler for
“Low Temperature Operation”
,
maximum temperature shall be limited with the Radiator
temperature adjustment button (3) (e.g. maximum 47 °C)}.
At that position, you can adjust the
temperature between 35 – 60 °C with the
Domestic Hot Water temperature adjustment
button (4) whose symbol is displayed. When
DHW button is rotated, while screen light
is on if you rotate (right) clockwise , you
can increase the temperature, and you can
decrease the temperature when rotated
counter clockwise (left) .
If you are starting the combi boiler for the
first time hold
MODE
button, and release
the button after the cycle is completed on
the screen, initially combi boiler switches to
radiator position, its symbol
will flash on
left top corner of the screen existing radiator
installation temperature shall be indicated on
the screen and screenlight will be turned-off.
In order to switch to DHW position, hold
MODE button and release the button after
completion of cycle on the screen. At that
position,
symbol flashes at right top corner
of the screen and existing DHW temperature
will be seen on the screen and screen light will
turn off.
At that position , you can adjust the
temperature between 35 – 60 °C with the
Domestic Hot Water temperature adjustment
button (4). Screen light will be open during
adjustment, tap symbol
and Domestic Hot
Water temperature value will flash. When the
DHW button is rotated, screen light turns on
and temperature can be increased by rotating
clockwise
, and decreased by rotating
counter clockwise . Adjusted temperature
is indicated on the screen via the indicator (7).
The value adjusted when button is released
shall be approved after flashing for 4-5
seconds.