WarmFlow A Series, Инструкция пользователя

Страница: 28 / 89

Page 26
Failure – Press this button to enter the Failure Logging Sub-Menu. Pressing the button brings
up the following display screen which displays the stored fault codes (most recent first). The date
and time are displayed as follows: DAY-MONTH HOUR:MINUTE:SECOND in order to record the
exact time when the fault occurred. A total of 42 codes can be stored together with the time and
date when the code occurred. Once an error code has been resolved, the error code can be
cleared by pressing the Clear button together with the reset password. A list of error codes, a
description and possible resolution can be found in section 3.14 of this manual.
NOTE: It is essential that these error codes are not cleared in order to allow an engineer
to fully diagnose the problem and prevent further failures.
Figure 20 Failure Logging Sub-Menu Screen