WAREMA WMS Скачать руководство пользователя страница 95

Страница: 95 / 132

890405_d•en•2015-12-01

We reserve the right to carry out improvements

Menu item

Setting range Description

Display scenes

Display product settings

Display sensor alloca-

tion

Display battery status

NOTE

In this menu, you can define what information and menus are displayed dur-

ing normal operation. In the dealer mode, all menus are always displayed.

9.1.3.14 product settings

Menu item

Setting range Description

Run time, up

00:04...04:00

mm:ss

Time that the product requires from the

lower to the upper limit position

Run time, down

00:04...04:00

mm:ss

Time that the product requires from the up-

per to the lower limit position

Automatic calibration,

0...10 s

Additional run time of product when the

"Run time up" has ended (additional time

to ensure that the product has opened

completely)

Automatic calibration,

down

0...10 s

Additional run time of product when the

"Run time down" has ended (additional

time to ensure that the product has closed

completely)

Tilting time

0.0...25.0 s

Time that a slat product requires to move

from the minimum to the maximum slat

angle

Minimum slat angle

-127...127°

- - -

Minimum slat angle permitted for the prod-

uct being controlled

Maximum slat angle

-127...127°

- - -

Maximum slat angle permitted for the prod-

uct being controlled

Tilting steps per tilt

1...20

Desired number of steps into which a full tilt

of the slats is subdivided

Change motor polarity

If the up-down direction is reversed, the po-

larity of the motor can be changed without

having to reconnect it.

NOTE

The availability of the individual settings varies with the product type.

Main menu



System



Products



Product type



Channel x



Settings



Product settings

System

Содержание WMS





































































































































Результаты поиска

Содержание WMS

Отзывы:

WAREMA WMS, Руководство по эксплуатации, Страница: 95 / 132

Результаты поиска

Содержание WMS

Отзывы: