890405_d•en•2015-12-01
We reserve the right to carry out improvements
60
WMS Central transmitter
8.1.2 Operating a product by
preselecting the position
The position is preset. The product does not move to the set value until the
value is enabled.
button
Action/result
In the main menu, press the function button repeatedly until
the selection cursor is on the [
Products
] line.
Press the
ok
button.
The [
Select product type
] menu opens.
Using the function buttons, select the product type that you
would like to operate.
Press the
ok
button.
All channels of this type are displayed.
Using the function buttons, select the channel that you would
like to operate.
Press the
ok
button.
All parameters of this channel are displayed. In the example
shown here of the external venetian blind, the position and
slat angle can be changed.
Use the selection cursor to select a line whose entry you
wish to change (in the example: slat angle).
Use the arrow buttons on the right to adjust the parameter to
the desired value
Confirm the changed value with
OK
.
The new value is now sent to the actuator and the product is
positioned accordingly.
The status display indicates the transmission process:
GREEN: The central transmitter is transmitting
RED:
The command is not confirmed (e.g. the receiver is
outside of the transmission range)
Main menu
Products
Product type
Channel
Products