890405_d•en•2015-12-01
We reserve the right to carry out improvements
130
WMS Central transmitter
11 Maintenance
There are no parts within the device that require maintenance.
In the event of a malfunction, the fine-wire fuses installed in the switch actua-
tors may only be exchanged by a qualified electrician.
Also follow the specifications in the operating instructions of your sun shad-
ing product and the other controlled devices.
12 Liability
Failure to comply with the product information in these instructions and use
of the unit in a manner that contravenes its intended use and purpose may
result in the manufacture refusing to honour warranty claims for product
damage. In this case, liability for consequential harm to persons or damage
to property will also be excluded.
Follow the instructions in the operating instructions of your sun shading prod-
uct. Liability is also excluded for damage to the sun shading system resulting
from operation under icy conditions.
The device meets the requirements on interference resistance and interfer-
ence emission for use in residential and commercial areas.
13 Cleaning
Clean the device occasionally using the supplied microfibre cloth.
Steam or high-pressure cleaners, abrasive sponges, abrasive agents, and
solvents such as alcohol or benzine may not be used.
CAAUIOA
When cleaning activities on the WMS system, on the sun shading product
itself or in the immediate vicinity of the sun shading product are required,
first de-energise the unit and secure it against reactivation.
14 isposal
After its use, the unit must be disposed of according to legal stipulations or
returned to your local recycling centre.
Maintenance