manualshive.com logo in svg

WAREMA WMS, Руководство по эксплуатации, Страница: 89 / 132

Поделиться
Скачать
WAREMA WMS Скачать руководство пользователя страница 89

890405_d•en•2015-12-01

We reserve the right to carry out improvements

89

9.1.3.3   awn/dusk control

Menu item

Setting range Description

Dawn/dusk control ON/

OFF

 

Activate/deactivate control function

Adjustable in hand-held 

transmitter

 

Here you can define whether hand-held 

transmitters belonging to the network can 

be used to influence the control mode

Active/inactive when 

absent

 

The automatic control function depends on 

the "absent" variable

Enable time, morn.

Mo-Fr

00:00...23:59 Time in the morning from Mo-Fr at which 

the dawn/dusk control is enabled

Enable time, morn. 

Sa-Su

00:00...23:59 Time in the morning on Sa-Su at which the 

dawn/dusk control is enabled

Enable time, eve. Mo-F 

r

00:00...23:59 Time in the evening from Mo-Fr at which the 

dawn/dusk control is disabled

Enable time, eve. Sa-Su 00:00...23:59 Time in the evening on Sa-Su at which the 

dawn/dusk control is disabled

Limit value, morning

10...500 lx

If this value is reached and exceeded, the 

product moves to the defined position and 

slat angle

Limit value, evening

10...500 lx

If the measured value reaches the limit 

value or drops below it, the product moves 

to the defined position and slat angle.

Position  

morning

0...100 %

Position to which the product is moved 

when the "Morning" limit value is reached

Slat angle, morning

-180...180°

Slat angle to which a slat product is moved 

when the "Morning" limit value is reached

Position, evening

0...100 %

Position to which the product is moved 

when the "Evening" limit value is reached

Slat angle, evening

-180...180°

Slat angle to which a slat product is moved 

when the "Evening" limit value is reached

Measured value, dawn/

dusk

The measured value is loaded from the 

actuator when the [

Settings

] menu is 

opened. To refresh the display, close the 

[

Settings

] menu and open it again.

9.1.3.4  Precipitation monitor

Menu item

Setting range Description

Precipitation monitor 

ON/OFF

 

Activate/deactivate the function

Adjustable in hand-held 

transmitter

 

Here you can define whether hand-held 

transmitters belonging to the network can 

be used to influence the control mode

Active/inactive when 

absent

 

The automatic control function depends on 

the "absent" variable

Main menu

 

System

  

Products

    

Product type

 

   

Channel x

 

    

Settings

 

     

Dawn/dusk control

Main menu

 

System

  

Products

    

Product type

 

   

Channel x

 

    

Settings

 

     

Precipitation monitor

System

Содержание WMS





































































































































Отзывы:

Нет отзывов