890405_d•en•2015-12-01
We reserve the right to carry out improvements
104
WMS Central transmitter
NOTE
If you wish to learn in a WMS Plug receiver that has already been learned
into another network, switch the mains voltage at the WMS Plug receiver off
and on by the following method. For about one minute, the WMS Plug receiv-
er acts as if it were in its delivered state. Within this period, it can be scanned
and added to a network. If the WMS Plug receiver is not learned into a net-
work within this minute, it returns to the mode it had before the PowerUp.
t
V
5 s
5 s
5 s
5 s
min. 5 s
0 V
230 V
Fig. 24
PowerUp on the WMS Plug receiver
9.2.1.2 Learning out actuators/
sensors
Proceed as follows to learn out actuators and sensors.
button
Action/result
In the main menu, select the [
System
] menu and press
ok
.
The [
System
] menu opens.
Select the [
Commissioning
] menu here and press
ok
.
The [
Commissioning
] menu opens.
Using the selection cursor, select the
[
Learn in/out actuators/sensors
] menu item.
Call up the function with
ok
.
The central transmitter searches for WMS devices. Then the
following menu is displayed.
NOTE
The overview shows all WMS devices that have
already been learned into the network or that were
found for the first time. If the device has already been
learned in, the
button is activated for learning out a
device.
Main menu
System
Commissioning
Learn in/out actuators/sensors
System