890405_d•en•2015-12-01
We reserve the right to carry out improvements
59
8.1 Operating the
products
To operate a product (a channel) with the WMS Central transmitter, several
options are available to you. You can operate the product directly, preselect
positions or recall a scene.
8.1.1 Operating a product
directly
The product responds directly to the press of a button on the WMS Central
transmitter.
Button
Action/result
In the main menu, press the function button repeatedly until
the selection cursor is on the [
Products
] line.
Press the
ok
button.
The [
Select product type
] menu opens.
Using the function buttons, select the product type that you
would like to operate.
Press the
ok
button.
All products of this type are displayed.
The buttons that are relevant to the particular product are
activated on the right.
Operate the product using the function buttons. In the follow-
ing example, the product is an external venetian blind:
Short: The slats tilt up
Long: The product moves up
The product stops
Short: The slats tilt down
Long: The product moves down
Short: The product moves to the stored comfort position
Long: The comfort position for the product is stored
NOTE
A detailed overview of the operating functions
of the various product types can be found in
Chapter 4.3 on page 20
.
The status display indicates the transmission after every
operating step:
GREEN: The central transmitter is transmitting
RED:
The command is not confirmed (e.g. the receiver is
outside of the transmission range)
Main menu
Products
Product type
Products