waratah HTH622B SIII, Руководство оператора

Страница: 52 / 66

1
1
XJ1267444—UN—25FEB19
5
2
2
3
XJ1320414—UN—08FEB22
4
4
XJ1320417—UN—08FEB22
Cylinder pin retainer bolts
1—Feed arm cylinder pin retainer bolt
2—Upper delimb knife cylinder pin retainer bolt
3—Upper delimb knife cylinder pin circular retainer bolt
4—Tilt cylinder pin retainer bolt
5—Measuring arm cylinder pin retainer bolt
12. Also check the torque on pin retainer bolts for the
delimb arm, measuring arm, tilt frame, and feed arm
cylinders. Torque to specification.
SPECIFICATIONS
Feed arm cylinder retainer pin bolt torque 63 Nm
46.5 lb-ft
Upper delimb knife cylinder retainer pin bolt
torque 63 Nm
46.5 lb-ft
Upper delimb knife cylinder retainer bushing bolt
torque 109 Nm
80 lb-ft
Tilt cylinder pin retainer bolt torque 109 Nm
80 lb-ft
Measuring arm cylinder retainer bolt torque 28 Nm
248 lb-in
T7M7G6M,000065B-19-09FEB22
Maintenance: Every 1000 Hours or 6
Months
SPECIFICATIONS
Rotator and ring gear mounting
bolt torque 125 Nm
92 lb-ft
Rotator link pin bolt torque 441 Nm
325 lb-ft
Converter pin cap screw torque 95 Nm
70 lb-ft
Tilt frame main pin bolt torque 350 Nm
258 lb-ft
Rotator motor mounting bolt
torque 125 Nm
92 lb-ft
CAUTION: To prevent possible injury while
working in the arm capture zones or the saw bar
opening, follow safety precautions. Lower the
harvester head to the ground and stop the
engine.
1. Complete the monthly checks.
2. Check all harvester head pressures. (See Settings.)
3. Grease the fixed feed motor splines and re-shim the
motor (if in softwood applications).
4. Rotate the feed wheel.
5. Check the torque on the rotator to ring gear
mounting bolts (1).
Maintenance: Schedule
3-2-6