waratah HTH622B SIII, Руководство оператора

Страница: 14 / 66

Waratah Switch Control (Two-position)
XJ1321583—UN—09MAR22
Waratah switch control
The Waratah switch control has two positions: Off and
On. These work in conjunction with the carrier controls
as described below.
Off
When the switch control is in the Off position:
● Hydraulic power, controller communications, and
electrical power to harvester head solenoids are
disabled.
● The rotator system is controlled by carrier hydraulics.
On
When the switch control is in the On position:
● Electrical power and communications to the
harvester head system are enabled.
● The Waratah controller is on.
When carrier hydraulic controls are On/ enabled:
● Waratah harvester head functions are enabled.
● Hydraulic power to the carrier machine is enabled.
● Carrier hydraulic controls are enabled.
When carrier hydraulic controls are Off/ disabled:
● Harvester head hydraulic functions are not active.
● Hydraulic power to the carrier machine is disabled.
● Carrier hydraulic controls are disabled.
NOTE: Manual mode for troubleshooting is activated
from the TimberRite ™ H-16 software rather than
via the switch.
T7M7G6M,0000881-19-25MAY22
TimberRite is a trademark of Deere & Company
Safety: Maintenance Precautions
1-3-3