Maintenance: Fluids and Lubricants
T7M7G6M,0000692 -19-23APR21-1/1
Grease Point Location: Measuring Wheel
Bearings
Applying excess grease to the measuring wheel bearings
affects the performance of the measuring unit. Grease
interval for pins is daily and grease interval for measuring
wheel bearings is every 100 hours (2 weeks).
1. Using your hand, rotate the measuring wheel to
ensure it rotates between 1 and 2 turns.
2. If the measuring wheel does not rotate one turn then
the grease may need replacing or a small amount of
grease may need to be removed or the bearings may
need to be checked.
3. If measuring wheel rotates more than 2 turns then
greasing is recommended.
NOTE: If grease fitting is to be left in measuring
wheel end cap, apply LOCTITE®Loctite™
243 (Blue) to the grease fitting.
4. Remove cap screw (1) from measuring wheel and
install grease fitting.
5. Apply 2 pumps and recheck by spinning the wheel.
TX1026616A
—UN—16JUL07
Grease point location: measuring wheel bearings
1— Cap screw
LOCTITE is a trademark of Henkel Corporation
3-1-15
090721
PN=57
Содержание HTH618C
Страница 2: ......
Страница 91: ...Index Index 3 090721 PN 91 ...
Страница 92: ...Index Index 4 090721 PN 92 ...