Support Email/ Skype: [email protected]
44
5.4.2.9 SMTP (E-mail) Setting
Enter SMTP (E-mail) Setting. Fill out relevant E-mail parameters as shown in the figure below to achieve E-mail delivery.
Mainstream E-mail suffixes supported by SMTP include: smtp.gmail.com, mail.yahoo.com, smtp.gmx.com, smtp-mail.outlook.com.
Take gmail setting as an example.
To get started, make sure that the e-mail provider you are using supports SMTP functions.
Server address
: SMTP stands for Simple Mail Transfer Protocol. This field allows the user to enter the SMTP server used by the email service.
Server Port
: This field allows the user to enter the port that corresponds to the selected SMTP server. The SMTP port is usually set at 25 if there is no security.
Some SMTP servers have their own ports, such as 587 or 465. Specific port number is to be determined by mail service provider.
Security connection
: This dropdown box allows the user to select an encryption type.
Authentication
: It should be on.
User name
: Input email address.
Password
: Please use your email password. For Gmail, please generate APP password
Sender Address
: This field allows the user to enter the email address to which alarms are sent. This email address should be consistent with the above Email
address for the User name.
Receiver Address #1
: These fields allow the user to enter the receiver email address which will receive any emails pertaining to alert and alarm emails.
Mail subject
: This field allows the user to define the subject line of the email.
Mail content
: This field allows the user to define the mail content.
5.4.3 Video and Audio
5.4.3.1 Video
Enter “Video Encoding Setting” to adjust camera power frequency
and video stream settings.
Power frequencies include: 50HZ, 60HZ; (220V voltage selection
50HZ. 110V voltage selects 60HZ, and 60HZ in Japan, Canada etc.)
Bit stream settings include: Resolution
(
1920*1080 or 1280*720
)
,
Bit rate (256~4096kbps), frame rate (1~30fps), steam control or
stream type etc.;
Reminder: Audio transmission video can be controlled through the
on/off button.