Support Email/ Skype: [email protected]
12
3)
Click "More", select "Wi-Fi Config", fill in the Wi-Fi password and click "Configuration".
Reminders:
●
Please complete configuration within 5min. after camera start-up (while the blue Wi-Fi indicator light is slowly flashing).
Otherwise, configuration cannot be completed and the power must be plugged in again.
●
The mobile phone speaker should be close to microphone of camera. Then click "Configure".
●
After successful configuration, the blue Wi-Fi indicator light of the camera will flash quickly several times. And then two
"beeps" will be heard. It will connect to the router automatically. Simultaneously, the blue indicator light will remain on (The
indicator light displays the status without plugging the network cable in. After plugging the cable in, the blue indicator light will
shut off). Click "Configuration" for 1 minute. If no corresponding reaction of the camera is observed, continuously click
"Configuration" for 5 minutes until completion of the configuration.
Method 2: Wi-Fi Set Up Via Advanced Settings
1) Please keep the camera on-line. Click the icon on the right side of the camera.
2) Enter advanced Settings
3) Select Wi-Fi Setting
4) Automatically search for available Wi-Fi SSID
5) Select WiFi hot spots to connect to
6) Input the password
7) Click Done to complete WiFi set up.
