40
W&T
IP-Watcher 2x2 Digital PoE
The repetition takes place only as long as the alarm is
1
active. For acknowledgeable alarms this is until an ACK,
otherwise until the trigger has been cleared.
The
Enable
block contains all the message types. Here you
select the communication path for reporting the alarm.
A possible acknowledgement can be set in the
Ack Enable
block. A hardware and/or software acknowledgement may be
selected.
If a hardware acknowledgement was selected, use the option
Hardware Ack Port
to specify the input that acknowledges the
alarm. In addition you must specify the edge used for triggering
the ACK.
Apply the changes by clicking on
Save
.
4.2 Formulating message texts
For the messaging types reporting over the network, three
messages each can be formulated which are sent by the device
depending on the alarm status:
.
Alarm ON message: This message is sent whe the alarm is
activated.
