52
W&T
IP-Watcher 2x2 Digital PoE
4.7.2 FTP parameters and texts
Go to page
Config >> Device >> Alarm >> Alarm X >> FTP
and enter the alarm-specific FTP parameters.
For
FTP Local Data Port
specify the local data port of the IP-
Watcher. Valid values are between one and 65536. Entering
Auto
causes the device to select the port dynamically.
Under File Name enter the file path for the file you want the
device to access. The file name can use the same tags as in the
FTP alarm text.
You can use the options STORE and APPEND to select whether
the sent data are written to a new file or appended to an existing
file. If the file does not yet exist, it is created in both cases.
FTP options „STORE“ and „APPEND“
Finally, configure the required message texts as described in
the section
Formulating message texts
. If you want a line feed,
insert a CRLF by pressing the Enter key at the end of the line.
Apply the changes by clicking on
Save
.
4.8 Alarming per TCP client
Configure the alarm condition for the desired alarm as
described in the section
Configuring alarms
.
Go to page
Config >> Device >> Alarm >> Alarm X >> TCP
and in the field
IP Addr
enter the IP address of the TCP server.
For
Port
specify the destination port.
